how to root Samsung j series
THERE ARE TWO METHOD TO ROOT THE SAMSUNG J SERIES
METHOD.1 BY USEING KINGROOT (WITHOUT PC)
METHOD.2 BY TWRP (PC REQUIRE )
LETS START
METHOD 1.
METHOD.1 BY USEING KINGROOT (WITHOUT PC)
METHOD.2 BY TWRP (PC REQUIRE )
LETS START
METHOD 1.
Rooting Samsung Galaxy J
- Download Kingroot.
- Download Super User apk.
- Copy the apk files in your Mobile Device.
- Install the King root.
- If it say Warning Understand the Warning and Click install anyway.
- After Installation,Open your app and Select make it ra1n.
- In few minutes your Device will restart.
- When the restart Completes install Supersu.
- Download Root checker to Check your Device.
Replace King User
- Download Super Su me.
- Install it in your Mobile.Select the Begin Button After Installation to replace the King User with Super User.
METHOD 2.
ROOT J SERIES USING TWRP RECOVERY
Instructions:
Flash with ODIN 3.12.7 in the AP slot.
Put your device in DOWNLOAD mode.
Uncheck Auto reboot.
Load the respective file below into the AP slot and hit start.
After flashing and ODIN reports PASS immediately reboot to recovery by holding POWER + HOME + VOL DOWN.
As soon as the screen goes blank change to VOL UP whilst still holding POWER + HOME.
You should now see TWRP recovery.
NOTE: FAILURE TO FOLLOW THE STEPS ABOVE IMPLICITLY WILL RESULT IN STOCK RECOVERY REPLACING TWRP AT FIRSTBOOT.
NOTE2: THIS DEVICE USES DM-VERITY, ANY CHANGES TO THE SYSTEM PARTITION COULD CAUSE THE DEVICE TO BOOTLOOP. IT MAY BE NECESSARY TO FLASH THE BOOT IMAGE PATCH BELOW.
NOTE: ON ANDROID 5.1.1/6.0/7.0 DEVICES IT IS NECESSARY TO GO TO:
Settings -> Developer Options -> OEM unlocking
AND ENABLE OEM UNLOCK FIRST OR YOU MAY ENCOUNTER 'BLOCKED BY FRP LOCK' WHEN FLASHING.
DOWNLOAD:
twrp_3.1.1-1_sm-g615f_26817
To Root:
Flash the latest SuperSU release with TWRP:
https://forum.xda-developers.com/app...2-05-t2868133/
To disable forced encryption, dm-verity and mountinternal storage (/data) :
(Note this MUST be flashed after SuperSU if you intend to root)
1. Boot to Twrp
2. Format Data partition using FORMAT DATA button under Wipe options.
(Note: This will wipe the internal storage)
3. Check DATA is mountable.
4. Install SuperSU (if root is required)
5. Install boot image patch below.
6. Reboot
Boot image patch
no-verity-no-encrypt_ashyx
TWRP DEVICE Tree:https://github.com/ashyx/TWRP_Samsung_j7maxlte(if anything happend toyour phone i am not responsible. do it on your risk)
Flash with ODIN 3.12.7 in the AP slot.
Put your device in DOWNLOAD mode.
Uncheck Auto reboot.
Load the respective file below into the AP slot and hit start.
After flashing and ODIN reports PASS immediately reboot to recovery by holding POWER + HOME + VOL DOWN.
As soon as the screen goes blank change to VOL UP whilst still holding POWER + HOME.
You should now see TWRP recovery.
NOTE: FAILURE TO FOLLOW THE STEPS ABOVE IMPLICITLY WILL RESULT IN STOCK RECOVERY REPLACING TWRP AT FIRSTBOOT.
NOTE2: THIS DEVICE USES DM-VERITY, ANY CHANGES TO THE SYSTEM PARTITION COULD CAUSE THE DEVICE TO BOOTLOOP. IT MAY BE NECESSARY TO FLASH THE BOOT IMAGE PATCH BELOW.
NOTE: ON ANDROID 5.1.1/6.0/7.0 DEVICES IT IS NECESSARY TO GO TO:
Settings -> Developer Options -> OEM unlocking
AND ENABLE OEM UNLOCK FIRST OR YOU MAY ENCOUNTER 'BLOCKED BY FRP LOCK' WHEN FLASHING.
DOWNLOAD:
twrp_3.1.1-1_sm-g615f_26817
To Root:
Flash the latest SuperSU release with TWRP:
https://forum.xda-developers.com/app...2-05-t2868133/
To disable forced encryption, dm-verity and mountinternal storage (/data) :
(Note this MUST be flashed after SuperSU if you intend to root)
1. Boot to Twrp
2. Format Data partition using FORMAT DATA button under Wipe options.
(Note: This will wipe the internal storage)
3. Check DATA is mountable.
4. Install SuperSU (if root is required)
5. Install boot image patch below.
6. Reboot
Boot image patch
no-verity-no-encrypt_ashyx
TWRP DEVICE Tree:https://github.com/ashyx/TWRP_Samsung_j7maxlte(if anything happend toyour phone i am not responsible. do it on your risk)
Comments
Post a Comment